There are a few ways to do this.
The first is to use a zigzag stitch.
Set the machine to a zigzag stitch and make sure the width of the stitch is wide enough to go over the embroidery design.
The second way is to use a satin stitch. This works well for curves because it gives you a smooth even finish.
To do this set the machine to a satin stitch and make sure the length of the stitch is long enough to cover the design.
Finally you can use a darning foot. This is an optional foot that can be purchased separately from your sewing machine dealer.
It works like a regular foot but has a small hole in the center so that you can see the design as you stitch.
There are a few things to keep in mind when embroidering with a sewing machine.
The first is that you need to use a stabilizer.
This will help keep the fabric from stretching and distorting as you stitch.
There are a variety of stabilizers available so be sure to ask your dealer which one is best for your project.
The second thing to keep in mind is that you need to use the correct needle. Embroidery needles are slightly different than regular sewing needles and are designed specifically for this type of stitching.
Finally take your time. Unlike regular sewing embroidery takes a bit more time and patience.
But the results are worth it!